2017 LED Street Light

Model	Power	Input Voltage	Efficacy	CCT	CRI	Optics	Housing Color	IP Rating	Warranty
2017 SUK-40WiL	40W	100-277/347-480VAC/12/24VDC	170lm/w	3000-6500K	Ra>70	Type II /Type III	Black/White	IP66	5 years
2017 SUK-80WiL	80W	100-277/347-480VAC/12/24VDC	170lm/w	3000-6500K	Ra>70	Type II / Type III	Black/White	IP66	5 years
2017 SUK-120WiL	120W	100-277/347-480VAC/12/24VDC	170lm/w	3000-6500K	Ra>70	Type II / Type III	Black/White	IP66	5 years
2017 SUK-160WiL	160W	100-277/347-480VAC/12/24VDC	170lm/w	3000-6500K	Ra>70	Type II / Type III	Black/White	IP66	5 years
2017 SUK-200WiL	200W	100-277/347-480VAC/12/24VDC	170lm/w	3000-6500K	Ra>70	Type II / Type III	Black/White	IP66	5 years
2017 SUK-240WiL	240W	100-277/347-480VAC/12/24VDC	170lm/w	3000-6500K	Ra>70	Type II / Type III	Black/White	IP66	5 years
2017 SUK-280WiL	280W	100-277/347-480VAC/12/24VDC	170lm/w	3000-6500K	Ra>70	Type II / Type III	Black/White	IP66	5 years

listings

UL listed: suitable for wet locations.

DLC listed: eligible for rebates from dlc member utilities.

IK10: EN 62262:2002

IESNA LM-79 & LM-80 Test Report

TM21: IES TM-21-11

According to TM-21-11, the rated lumen maintenance of product may 75.11% at

50000 hours. L70 hours is 62000h.

TUV-EMC:

EN 55015:2013

EN 61000-3-2:2013

EN 61000-3-3:2013

EN 61547:2009

TUV-GS:

EN 60598-1:2008+A11
EN 60598-2-3:2003+A1
EN 62471:2008
EN 62493:2010
ZEK 01.4-08/11.11

TUV-CB:

IEC 60598-1:2008

IEC 60598-2-3 2002+A1

TUV-IP66:

IP66 test according to Clause 9.2.25, Clause 9.2.7 of
EN 60598-1:2008+A11

EN 60598-2-3:2003+A1:2011

TUV-RoHs:

Cadmium, Lead, Chromium (VI), Mercury, Polybrominated biphenyls (PBB)and Polybrominated diphenyl ethers (PBDE)
According to RoHS (recast): Restriction of the Use of Certain HazardouS Substances in Electrical and Electronic Equipment, 2011/65/EU

RCM:

IEC 60598-2-3:2002+A1:2011 used in conjunction with IEC 60598-1:2008

AS/NZS CISPR 15:2011   Power Line Conducted Emission Test (9kHz To 30MHz)
AS/NZS CISPR 15:2011   Radiated Emission Test(30MHz To 300MHz)
AS/NZS CISPR 15:2011   Magnetic Radiated emission Test (9kHz To 30MHz)

SAA:

IEC 60598-2-3 Ed 3.1

AS/NZS 60598.1:2013

Electrical

Driver:	Function
Constant Current,120-277VAC(up to 305VAC)	Three in one dimming function: 1-10Vdc or PWM signal or resistance
Built-in active PFC function Protections: Short circuit/Over current/Over voltage/Over temperature	Photocell: Twist-lock/Plug-in Locking Type Controls
THD< 20% at 120VAC/277VAC PF>0.96/120VAC, PF>0.94/277VAC	SPD: 4KV,6KV,10KV,20KV

Construction

Application: roadway/street/path way/park/public square/parking lot/carpark

Housing: Heat Radiation: 6063 Al for better heat transfer, raising temperature< 26℃.

Ratings: IP66;IK10

Anti-salty spray: Grade A

Mounting: Bracket 0-90 degree adjustable

Diversified installation methods, can be installed on the square-shape pole as well by simply adding an extra converter.

Finish: Corrosion resistant

Sensor Specifications

Light Sensor(Photocell), UL listed photocell, strong resistance to surge current.

LED Characteristics

LUXEON 5050

•Superior efficacy and light output from a compact source

•Optimized for efficacy driven applications with typical Vf: 2.7V and low thermal resistance: 3 K/W

•Delivers high luminance ideal for directional lighting

•Specified, targeted and tested hot, at real world operating temperatures, Tj = 85°C to ensure in-application performance

•Freedom from Binning delivers color consistency within- 3 or 5-step SDCM MacAdam Ellipse

•Proven reliability

•Exceeds ENERGY STAR lumen maintenance requirements

•UL-recognized component [E352519] with level 4 enclosure consideration

Light Distribution

Street light & Parking light should fit with a wide range of applications, such as highway, express way, roadway, avenue, walking path or parking lot lightings. Considering this, SUK provides different light distribution lens for the iL Series street light to achieve best lighting effect in different applications.

SUK follows the North American IESNA standard in providing the optional lens with Type II and Type III.

LED Distribution Type:

Type II ：The Type II lens is suitable for the highway with 2 lanes.

Type III ： The Type III lens is for 3 lanes roadway.

Light Distribution

SUK follows the North American IESNA standard in providing the optional lens with Type II and Type III.

LED Distribution Type:

Type II ：The Type II lens is suitable for the highway with 2 lanes.

Type III ： The Type III lens is for 3 lanes roadway.